Maintenance Shed – Page II

Roof and Windows
Put the roof on. One layer is printed to look like boards .. and the one on top of that tar paper.

I decided to use Tichy windows instead of the printed ones with the kit. In this pic, I have them set in place. At the moment they are just the gray plastic .. need to paint still and work on the inner wall showing through the window (showing white right now). The freight door is in place. I used laser cut hinges from Vector Cut.

Still need to figure out what to do for above the door. The kit comes with a length of four windows. I might just replace that opening with a piece of plywood.

Not sure what color for the windows. I can try and match the greenish-gray of the building .. but might try for a little color .. like a darker green perhaps. If I do I will have to replicate that on the trim.

Finishing Up
I painted the windows green .. dry brushed the rest of the trim with the same color. I used a couple of pins snipped off for door knobs. Clear plastic behind the windows .. and that’s about it.

All in all .. was a happy little build.

Leave a Reply

Your email address will not be published. Required fields are marked *

Heads up! You are attempting to upload an invalid image. If saved, this image will not display with your comment.